7216
The Federal Way Transit Center garage elevator 1 is out of service until further notice.
Please use the adjacent in-service elevator. Passengers requiring further assistance should contact a security officer.
Please use the adjacent in-service elevator. Passengers requiring further assistance should contact a security officer.
Affected direction: to Everett Affected stops: Edmonds Station Mukilteo Station Everett Station
To Lynnwood, passengers requiring elevator service must go to another station. To ride the 1 Line: 1. Take the elevator down to the Angle Lake platform. 2. Take the 1 Line to Columbia City Station. 3. At Columbia City Station, transfer to the Lynnwood platform. Passengers requiring elevator service CANNOT exit from the Lynnwood platform. To exit the station: 1. Board the 1 Line. 2. Take the 1 Line to International District/Chinatown Station. 3. At International District/Chinatown Station, use the elevators to transfer to the Angle Lake platform. 4. Take the 1 Line to return Mount Baker Station. 5. Passengers can exit Mount Baker Station using the Angle Lake platform elevator. The elevator serving the Angle Lake platform is operating.
To ride the 1 Line: 1. Take the adjacent elevator to the street level. 2. Enter the station through the Exit A. 3. Take the elevator up to the platform. To exit the station: 1. Take the adjacent elevator to the street level. 2. Exit the garage.
Passengers requiring elevator service from International Blvd must board at another station. To ride the 1 Line: 1. Cross International Blvd using the crosswalk at S 176th St to the King County Metro bus stop. 2. Ride the southbound RapidRide A-Line to International Blvd & S 200th St for Angle Lake Station. 3. Street level elevators at Angle Lake Station are located on 28th Ave S. Passengers requiring elevator service to International Blvd CANNOT exit from the SeaTac/Airport mezzanine. To exit the station: 1. Board the 1 Line toward Angle Lake. 2. Exit the 1 Line at Angle Lake Station and take the elevators down to the street (28th Ave S & S 200th St). 3. Continue on S 200th St toward International Blvd. 4. Turn left on International Blvd and continue until you reach the King County Metro bus stop. 5. Take the northbound RapidRide A-Line to S 176th & International Blvd to return to SeaTac/Airport Station.
To ride the 1 Line: 1. Exit the station. 2. Turn right onto 12th Ave NE. 3. Turn right onto NE 65th St. 4. Enter the station and take the elevator down to the platform. To exit the station: 1. Go to the opposite end of the platform toward Exit B. 2. Take the elevator up to the street.
The scheduled maintenance is to adjust handrails at 2 accessible ramps and 1 stairwell at the entrance to the 148th station/garage. The work will occur in 3 phases. Phase 1: Dec 2-4 The ramp on the south side of the entrance will be closed (stairs on south side and ramp on north side of entrance to remain open). Phase 2: Dec 4-5 The stairs will be closed (ramps on side and north side of entrance remain open). Phase 3: Dec 5-6 The ramp on the north side of the entrance/148th will be closed (ramp and stairs on south side of entrance remain open). Work will be done sequentially, so there is always one ramp at the entrance open. The accessible path on the south side of the garage will remain open. The maintenance is weather dependent, dates and times are subject to change.
The work will require escalators to be turned off for an estimated 8-9 days each escalator, and at times may impact walk/roll paths through portions of the station or plazas. Most the work will be conducted between 8 p.m. and 5 a.m. so as to reduce impact to passengers. Stairwells will be closed at times during these hours while scaffolding is being erected or dismantled. Escalator closures are currently planned for the following date ranges: • Dec 6-10: escalator at north end of station (serving Exit A) will be out of service. • Dec 10-14: escalator at south end of station (serving Exit B) will be out of service. This work will not impact elevator access at the station. The work schedule is subject to change. For updated information, passengers should subscribe to station-specific service alerts. Visit the Service alerts web page to sign up and find current information on service disruptions. From this page you can also sign up to receive alerts by text or email. If
Beginning 7 a.m. Monday, December 2 through 5 p.m. Friday, December 20, Sound Transit will be replacing expansion joint covers on the South Bellevue Station. This work entails closure of one elevator and stairwell at a time, beginning with the elevator and stairwell at the north end of the platform (Exit A). Once the expansion joints are replaced at the north end of the platform, the work will proceed to the south end of the platform (Exit B). During the work hours, passengers should use the elevator or stairwell at the other end of the station. The work will occur from 7 a.m. to 5 p.m. each day. After 5 p.m. until 7 a.m. the following morning, the elevator and stairwell will be restored to service OR will remain closed. Both elevators are stairwells are expected to be restored to service by 5 p.m. December 20. For updates, passengers should subscribe to service alerts for accessibility. You can also sign up for station-specific updates. Visit the service alerts web page to sign up for alerts and current information on service disruptions. If you need assistance in a Sound Transit station, please call or text Security at (206) 398-5268. If you need specific trip planning support, please call Passenger Care at 1-888-889-6368 (Mon-Fri, 8 a.m.-6 p.m.).
Installation of this equipment is needed to provide real-time train arrival information made possible through Sound Transit’s new Passenger Information Management System (PIMS). Information displayed on signs at the stations may not be viewable during installation and testing. There should be minimal impact on how a passenger navigates through the platform. Dec 11-13: Tukwila Station Dec 16-18: Sumner Station Dec 19-23: Kent Station This schedule may be subject to change and updates will be provided when available.
To ride the 1 Line: Please use the adjacent in-service elevator. To exit the station: Please use the adjacent in-service elevator.
To ride the 1 Line: 1. Continue on Brooklyn Ave NE toward NE 43rd St. 2. Enter the station and take the elevator down to the platform. To exit the station: 1. Go to the opposite end of the platform toward Exit B. 2. Take the elevator up to the street.
Affected direction: to Lakewood/Tacoma
Seattle Kraken vs. Anaheim Ducks Please plan ahead for additional travel time and anticipate crowds in stations, on platforms, in trains, and in parking facilities. On game days, parking facilities fill up quickly and earlier in the day. Plan accordingly to ensure you can secure parking.
To ride the 1 Line: Please use the adjacent in-service elevator. To exit the station: Please use the adjacent in-service elevator.
To ride the 1 Line: Please use the adjacent in-service elevator. To exit the station: Please use the adjacent in-service elevator.
To ride the Sounder: Use the adjacent elevator for access to parking levels and Sounder tracks.
To Angle Lake, passengers requiring elevator service must go to another station. To ride the 1 Line: 1. Take the elevator down to the Northgate platform. 2. Take the 1 Line to Pioneer Square Station. 3. At Pioneer Square Station, use the elevators to transfer to the Angle Lake platform. Passengers requiring elevator service CANNOT exit from the Angle Lake platform. To exit the station: 1. Board the 1 Line. 2. Take the 1 Line to Stadium Station. 3. At Stadium Station, board the 1 Line toward Northgate. 4. Exit the 1 Line at International District/Chinatown Station. 5. Passengers can exit International District/Chinatown Station using the Northgate platform elevators. The northbound platform elevators serving Northgate trains are operating.
To ride the 1 Line: 1. Take the adjacent elevator to the street level. 2. Enter the station through Exit A. 3. Take the elevator up to the platform. To exit the station: 1. Take the adjacent elevator to the street level. 2. Exit the garage.
To ride the 1 Line: 1. Continue north on S 28th St. 2. Cross S 200th St. 3. Take the elevator up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
To ride Sounder as a passenger with a vehicle: 1. Take the elevator down to return to the parking lot (Park & Ride C). 2. Return to your vehicle. 3. Travel to Park & Ride B for access to Everett Station. To ride Sounder as a passenger without a vehicle*: 5. Take the elevator down to return to the parking lot (Park & Ride C). 6. Exit the parking lot and turn left on Hill Ave. 7. Turn left on Pacific Ave and continue west. 8. Turn left on Smith Ave and continue south. 9. Enter Everett Station (Smith Ave & 32nd St). *Note: This detour includes approximately 0.6 miles of additional travel and includes changes in elevation To exit the station to Park & Ride Lot C: 1. Turn right on Smith Ave. 2. Continue north on Smith Ave to Pacific Ave. 3. Turn right on Pacific Ave and continue east. 4. Turn right onto Hill Ave. 5. Enter the Park & Ride Lot C.
The 1 Line will operate in three segments. Passengers will need to transfer between each segment to continue their journey: - Lynnwood–U District: about every 22 minutes - U District–Capitol Hill: about every 22 minutes - Capitol Hill–Angle Lake: about every 15 minutes Passengers are encouraged to plan for up to an hour of additional travel time or seek alternate transportation options. Supplemental shuttle buses will run every 10-15 minutes between U District, University of Washington, and Capitol Hill stations to help with crowding. Trains will share one track at Roosevelt, U District, and University of Washington stations. Check train signage to ensure boarding the correct train. For more information and bus alternatives, please visit soundtransit.org/disruption.
To ride the 1 Line: 1. Park at the street level of the parking garage. 2. Travel to the station. To exit to the garage parking levels: The Angle Lake Garage parking levels 1 - 2 and 4 - 7 are inaccessible to passengers requiring elevator service. To access these levels, call Transit Security at 206-398-5268 to assist you.
Please use elevator 1 or 2 located in the northeast corner of the garage until repairs have been completed. Please use caution when crossing the tracks.
To ride the 1 Line to Lynnwood: 1. Exit the station and continue on 3rd Ave toward James St. 2. Enter the station using the elevator at 3rd Ave & Yesler Way. 3. Take the elevator at the South Mezzanine down to the Angle Lake platform. 4. Go to the opposite end of the platform toward Exit A. 5. Take the elevator up to the North Mezzanine. 6. Cross the North Mezzanine. 7. Take the elevator down to the Lynnwood platform. To ride the 1 Line to Angle Lake: 1. Exit the station and continue on 3rd Ave toward James St. 2. Enter the station using the elevator at 3rd Ave & Yesler Way. 3. Take the elevator at the South Mezzanine down to the Angle Lake platform To exit the station: 1. Go to the opposite end of the platform toward Exit A. 2. Take the elevator up to the South Mezzanine. 3. Cross the South Mezzanine. 4. Take the elevator down to the Angle Lake platform. 5. Go to the opposite end of the platform toward Exit C. 6. Take the elevator up to the North Mezzanine.
To ride the 1 Line: Please use the adjacent in-service elevator. To exit the station: Please use the adjacent in-service elevator.
To ride the 1 Line: Please use the adjacent in-service elevator. To exit the station: Please use the adjacent in-service elevator.
To ride the 1 Line: 1. Exit the station through the Northeast Station Plaza. 2. Cross 46th Ave W and go through the Southwest Station Plaza. 3. Enter the station through Exit B and take the elevator up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
Please use elevator 1 or 2 located in the northeast corner of the garage until repairs have been completed. Please use caution when crossing the tracks.
To ride the 2 Line: 1. Go to the opposite end of the garage. 2. Take the elevator to the ground level. 3. Travel to the station. To exit the station: 1. Go to the opposite end of the garage. 2. Take the elevator up to the desired level.
To ride the 1 Line: 1. Exit the station through the Southwest Station Plaza. 2. Cross 46th Ave W and go through the Northeast Station Plaza. 3. Enter the station through Exit A and take the elevator up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
To ride the 1 Line: 1. Exit the station through the Southwest Station Plaza. 2. Cross 46th Ave W and go through the Northeast Station Plaza. 3. Enter the station through Exit A and take the elevator up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
To ride the 1 Line to Angle Lake: 1. Continue on 5th Ave S toward S Jackson St. 2. Take the elevator down to the Angle Lake platform. To exit the station: 1. Go to the opposite end of the platform toward Exit A. 2. Take the elevator up to the street.
Affected direction: to Lakewood/Tacoma Affected stops: Kent Station Auburn Station Sumner Station Puyallup Station Tacoma Dome Station South Tacoma Station Lakewood Station
This message is for passengers and pedestrians who use the Weller Street Bridge at King Street Station between 9 p.m. and 5 a.m. (outside of Sounder train hours of operation), to cross the tracks between 4th Ave S and the Amtrak Station or Lumen Field area in Seattle. During the following times, Sound Transit will be replacing an expansion joint underneath the sidewalk and curb ramp at the east end of Weller Street Bridge. • Beginning 9 p.m. Nov. 25 until 5 a.m. Nov. 26 • Beginning 9 p.m. Nov. 26 until 5 a.m. Nov. 27 During these hours, the following pedestrian pathways will be closed: • Weller Street Bridge, including the entrance and elevator at the west end of Weller Street Bridge. • Curb ramp on the west side of 4th Ave S at Weller St. • Crosswalk across 4th Ave S at Weller St. Pedestrians will be able to cross 4th Ave S at S Jackson St or Seattle Blvd S. • Sidewalk on the west side of 4th Ave S between S at S Jackson St or Seattle Blvd S. The timing of this work
https://www.soundtransit.org/