11951
Mukilteo Station - Elevator 2 has returned to service.
The elevator at the Husky Stadium exit serving the street (Montlake Blvd NE), pedestrian bridge, and platform is out of service until further notice. See below for alternate route information. To ride the 1 Line: 1. Take the elevator located directly across from the out of service unit down to the platform. To exit the station: 1. Take the nearby elevator located directly across from the out of service unit up to the street or pedestrian bridge to Montlake Blvd NE.
Test trains will run between Lynnwood and Stadium on 4-minute headways in both directions alongside regular service. Trains with "Out of Service" head signs will briefly pause at stations but doors will remain closed. This testing will help us prepare for more frequent service once the 2 Line crosses Lake Washington and extends to Lynnwood City Center. During the testing hours, we will not display estimated train arrival times on the overhead digital signs.
Passengers parked in the designated event area during the time of the closure will be subject to towing under RCW 46.55.
Downtown Redmond Station - Elevator 1 has returned to service.
The elevator at Exit A serving the street (NE 70th St), parking garage, and platform is out of service until further notice. See below for alternative route information. To ride the 2 Line: Entering from the parking garage: 1. Please use the adjacent elevator 2. Take the elevator down to the platform. To exit the station: To the street: 1. Cross the tracks to exit the station. From the platform: 1. Travel to the north end of the platform. 2. Take the elevator up to the parking garage. From outside the station: 1. Cross the tracks to the platform. 2. Travel to the north end of the platform. 3. Take the elevator up to the parking garage.
To ride the 1 Line: 1. Go to the opposite north end of the station. 2. Take the elevator up to the platform. To exit the station: 1. Go to the opposite north end of the platform. 2. Take the elevator down to the street.
To ride the 1 Line to Angle Lake: 1. Go to the opposite end of the mezzanine toward Exit A. 2. Take the elevator down to the Angle Lake platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator up to the mezzanine. 3. Continue to the desired exit.
Seattle Mariners vs Tampa Bay Rays Please plan ahead for additional travel time and anticipate crowds in stations, on platforms, in trains, and in parking facilities. On game days, parking facilities fill up quickly and earlier in the day. Plan accordingly to ensure you can secure parking. Click the link below to learn about taking transit to the game or plan out your ride with our trip planner.
The track blockage described below has ended. Trains may still arrive behind schedule while service recovers. Please continue to plan ahead for additional travel time. 1 Line trains traveling both directions are up to 25 minutes behind schedule due to a blockage on the tracks between Tukwila Int'l. Blvd. and Rainier Beach stations. Affected directions: Northbound departures toward Lynnwood. Southbound departures toward Angle Lake. This may also affect all other departure times at other stations. Please plan for additional travel time.
To ride the 1 Line: 1. Go to the opposite end of the Station (cross 236th St NW). 2. Take the elevator at Exit A up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
The elevator outage described below has ended. SeaTac Airport Station. The elevator at the International Blvd exit serving the street and pedestrian bridge to mezzanine is out of service due to unplanned outage. Elevators to the platform are in service for entering from the airport terminal walkway. Passengers requiring elevator service from International Blvd must board at another station. To ride the 1 Line: 1. Cross International Blvd using the crosswalk at S 176th St to the King County Metro bus stop. 2. Ride the southbound RapidRide A-Line to International Blvd & S 200th St for Angle Lake Station. 3. Street level elevators at Angle Lake Station are located on 28th Ave S. Passengers requiring elevator service to International Blvd CANNOT exit from the SeaTac/Airport mezzanine. To exit the station: 1. Board the 1 Line toward Angle Lake. 2. Exit the 1 Line at Angle Lake Station and take the elevators down to the street (28th Ave S & S 200th St). 3. Continue on S 200th St toward International Blvd. 4. Turn left on International Blvd and continue until you reach the King County Metro bus stop. 5. Take the northbound RapidRide A-Line to S 176th & International Blvd to return to SeaTac/Airport Station.
Affected direction: to Lakewood/Tacoma
Affected direction: to Seattle Affected stops: Puyallup Station (to Seattle) Sumner Station (to Seattle) Auburn Station (to Seattle) Kent Station (to Seattle) Tukwila Station (to Seattle) King Street Station (to Seattle)
Affected direction: to Lakewood/Tacoma
Affected direction: to Lakewood/Tacoma
Affected direction: to Everett
Affected direction: to Lakewood/Tacoma Affected stops: Auburn Station (to Lakewood/Tacoma) Sumner Station (to Lakewood/Tacoma) Puyallup Station (to Lakewood/Tacoma) Tacoma Dome Station (to Lakewood/Tacoma)
To ride the 2 Line: 1. Please use the adjacent in-service elevator. 2. Take the elevator down to the platform. To exit the station: 1. Please use the adjacent in-service elevator. 2. Take the elevator up to street level to exit the station.
The elevator outage described below has ended. Spring District Station - Elevator 4 unavailable until further notice due to maintenance. To ride the 2 Line: 1. Please use the adjacent in-service elevator. 2. Take the elevator down to the platform. To exit the station: 1. Please use the adjacent in-service elevator. 2. Take the elevator up to street level to exit the station.
To ride the 1 Line: 1. Continue on Brooklyn Ave NE toward NE 43rd St. 2. Enter the station and take the elevator down to the platform. To exit the station: 1. Go to the opposite end of the platform toward Exit B. 2. Take the elevator up to the street.
The elevator outage described below has ended. Lynnwood City Center Station - Elevator 2 unavailable until further notice due to maintenance. The elevator at Exit A serving the street (46th Ave W and North Parking Garage) and platform is out of service until further notice. To ride the 1 Line: 1. Exit the station through the Northeast Station Plaza. 2. Cross 46th Ave W and go through the Southwest Station Plaza. 3. Enter the station through Exit B and take the elevator up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
To ride the 2 Line: 1. At the opposite side of the plaza, take the adjacent elevator to the Redmond Technology platform. 2. Go to the opposite side of the platform. 3. Take the elevator at Exit B2 (110th Ave NE) up to the plaza. 4. Take the elevators at the opposite side of the plaza down to the South Bellevue platform. To exit the station: 1. Take the elevators at Exit B2 (110th Ave NE) to the street.
Seattle Mariners vs Tampa Bay Rays Please plan ahead for additional travel time and anticipate crowds in stations, on platforms, in trains, and in parking facilities. On game days, parking facilities fill up quickly and earlier in the day. Plan accordingly to ensure you can secure parking. Click the link below to learn about taking transit to the game or plan out your ride with our trip planner.
To ride the 1 Line: 1. Go to the opposite end of the Station (cross 236th St NW). 2. Take the elevator at Exit B to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator to the street.
See below for alternate route information. To ride the 1 Line: 1. Go to the opposite end of the Station (cross 236th St NW). 2. Take the elevator at Exit A up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
The elevator outage described below has ended. SeaTac/Airport Station - Elevator 1 unavailable until further notice. The elevator serving the platform and the mezzanine is out of service until further notice. See below for alternate route information. To ride the 1 Line: 1. Go to the opposite end of the station toward the pedestrian bridge to International Blvd. 2. Take the elevator next to the pedestrian bridge up to the platform. To exit the station to Airport Terminals & International Blvd: 1. Go to the opposite end of the platform. 2. Take the elevator down to the mezzanine. 3. Take the Airport Terminal Walkway to enter the airport OR take the pedestrian bridge to exit at International Blvd.
The service interruption described below has ended. 1 Line trains are bypassing Beacon Hill Station due to station testing following previous power related issue. Passengers traveling to/from this station need to use Link Shuttle buses. Train service remains active between Angle Lake and Lynnwood City Center stations; however, will not stop at Beacon Hill Station due to station testing following the previous power related issues. Passengers traveling to/from Beacon Hill Station need to use Link Shuttle buses at the following stations: • SODO Station - to Angle Lake: SODO Busway & S Lander St • Beacon Hill Station - to Lynnwood: Beacon Ave S & S Lander St - to Angle Lake: Beacon Ave S & S Lander St • Mount Baker Station - to Lynnwood: Rainier Ave S & S Forest St Passengers traveling to/from Beacon Hill can also take the following alternate service options: - from downtown Seattle: Route 36 - from Capitol Hill: Route 60 - from Othello Station: Route 36 For other alternative routes, use our Trip Planner: https://www.soundtransit.org/tripplanner/travel-by/bus
To ride the 1 Line to Lynnwood from Tukwila Int'l Blvd Station: 1. Take the elevator up to the Angle Lake platform. 2. Take the 1 Line to SeaTac/Airport Station. 3. At SeaTac/Airport Station, board the 1 Line toward Lynnwood. Passengers requiring elevator service CANNOT exit from the Lynnwood platform. To exit the station from Tukwila Int'l Blvd Station: 1. From the Lynnwood platform, board the 1 Line. 2. Take the 1 Line to Rainier Beach Station. 3. At Rainier Beach Station, board the 1 Line toward Angle Lake. 4. Exit the 1 Line at Tukwila Int'l Blvd Station. 5. Riders can exit Tukwila Int'l Blvd Station using the Angle Lake platform elevator.
Seattle Mariners vs. Tampa Bay Rays -S Line train will depart Lakewood at 10:11 a.m. and depart King Street Station 45 minutes after the game ends. -N Line train will depart Everett at 10:45 a.m. and depart King Street Station 45 minutes after the game ends. Want to spread out a bit on your Sounder S Line ride to the game? Head for the northernmost train cars—they're usually a lot less crowded! Click the link below for more information about today's event service.
Affected direction: to Lakewood/Tacoma Affected stops: Sumner Station (to Lakewood/Tacoma) Puyallup Station (to Lakewood/Tacoma) Tacoma Dome Station (to Lakewood/Tacoma) South Tacoma Station (to Lakewood/Tacoma) Lakewood Station (to Lakewood/Tacoma)
To ride the 1 Line to Lynnwood from Tukwila Int'l Blvd Station: 1. Take the elevator up to the Angle Lake platform. 2. Take the 1 Line to SeaTac/Airport Station. 3. At SeaTac/Airport Station, board the 1 Line toward Lynnwood. Passengers requiring elevator service CANNOT exit from the Lynnwood platform. To exit the station from Tukwila Int'l Blvd Station: 1. From the Lynnwood platform, board the 1 Line. 2. Take the 1 Line to Rainier Beach Station. 3. At Rainier Beach Station, board the 1 Line toward Angle Lake. 4. Exit the 1 Line at Tukwila Int'l Blvd Station. 5. Riders can exit Tukwila Int'l Blvd Station using the Angle Lake platform elevator.
Affected direction: to Lakewood/Tacoma Affected stops: Sumner Station (to Lakewood/Tacoma) Puyallup Station (to Lakewood/Tacoma) Tacoma Dome Station (to Lakewood/Tacoma) South Tacoma Station (to Lakewood/Tacoma) Lakewood Station (to Lakewood/Tacoma)
Passengers requiring elevator service from International Blvd must board at another station. To ride the 1 Line: 1. Cross International Blvd using the crosswalk at S 176th St to the King County Metro bus stop. 2. Ride the southbound RapidRide A-Line to International Blvd & S 200th St for Angle Lake Station. 3. Street level elevators at Angle Lake Station are located on 28th Ave S. Passengers requiring elevator service to International Blvd CANNOT exit from the SeaTac/Airport mezzanine. To exit the station: 1. Board the 1 Line toward Angle Lake. 2. Exit the 1 Line at Angle Lake Station and take the elevators down to the street (28th Ave S & S 200th St). 3. Continue on S 200th St toward International Blvd. 4. Turn left on International Blvd and continue until you reach the King County Metro bus stop. 5. Take the northbound RapidRide A-Line to S 176th & International Blvd to return to SeaTac/Airport Station.
To ride the 2 Line: Entering from the parking garage: 1. Please use the adjacent elevator 2. Take the elevtor down to the platform. To exit the station: To the street: 1. Cross the tracks to exit the station. From the platform: 1. Travel to the north end of the platform. 2. Take the up to the parking garage. From outside the station: 1. Cross the tracks to the platform. 2. Travel to the north end of the platform. 3. Take the elevator up to the parking garage.
To ride the 1 Line from the Street (E John St & Broadway Ave E): 1. Go to Broadway Ave E and turn left toward E Denny Way. 2. Enter the station at the corner of E Denny Way & Nagle Place near Cal Anderson Park. 3. Take the street level elevator down to the platform. To ride the 1 Line from the North Mezzanine: 1. Return to the North Mezzanine elevator serving the street to exit the station. 2. Go to Broadway Ave E and turn left toward E Denny Way. 3. Enter the station at the corner of E Denny Way & Nagle Place near Cal Anderson Park. 4. Take the street level elevator down to the platform. To exit the station: 1. Go to the opposite end of the platform toward the E Denny Way exit. 2. Take the elevator up to the street.
The elevator outage described below has ended. SeaTac Airport Station: The station is now accessible to passengers requiring elevator service. Elevator 2 is still unavailable due to mechanical issue. To ride the 1 Line: 1. Go to the opposite end of the station past the entrance to the airport terminal walkway. 2. Take the elevator up to the platform. To exit the station to Airport Terminals & International Blvd: 1. Go to the opposite end of the platform. 2. Take the elevator down to the mezzanine. 3. Take the Airport Terminal Walkway to enter the airport OR take the pedestrian bridge to exit at International Blvd.
Seattle Mariners vs Chicago White Sox Please plan ahead for additional travel time and anticipate crowds in stations, on platforms, in trains, and in parking facilities. On game days, parking facilities fill up quickly and earlier in the day. Plan accordingly to ensure you can secure parking. Click the link below to learn about taking transit to the game or plan out your ride with our trip planner.
See below for alternate route information. To ride the 1 Line: 1. Take the adjacent elevator to the street level. 2. Enter the station through Exit A. 3. Take the elevator up to the platform. To exit the station: 1. Take the adjacent elevator to the street level. 2. Exit the garage.
Please use the adjacent in-service elevators to ride the 1 Line and exit the station.