To ride the 2 Line: 1. Go to the opposite end of the station. 2. Take the elevator up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
To ride the 1 Line from the street: 1. Go to Broadway Ave E and turn right toward E John St. 2. Enter the station at the corner of E John St and Broadway Ave E. 3. Take the street level elevator down to the North Mezzanine for elevator access to the platform. To ride the 1 Line from the South Mezzanine: 1. Take the pedestrian walkway toward the west exit. 2. Take elevator up to the street. 3. Turn left on Broadway Ave E. 4. Enter the station at the corner of E John St and Broadway Ave E. 5. Take the street level elevator down to the North Mezzanine for. To exit the station from the platform: 1. Go to the opposite end of the platform toward the E John St exit. 2. Take the platform elevator to the North Mezzanine. 3. Take the elevator at the North Mezzanine up to the street (E John St & Broadway Ave E) elevator access to the platform.
To ride the 2 Line: Passengers requiring elevator service must go to another station. 1. Go to the South Bellevue Bus Plaza. 2. Take King County bus 550, 249, or 241 to the Bellevue Transit Center. 3. Exit the Bellevue Transit Center and cross 110th Ave NE. 4. Enter the Downtown Bellevue Station and take elevator down to platform to board the 1 Line. To exit the station: Passengers requiring elevator service CANNOT exit from the platform. 1. From the platform, board the 2 Line toward Redmond Technology. 2. Take the 2 Line to Downtown Bellevue Station. 3. At Downtown Bellevue Station, exit the station. 4. Go to the Bellevue Transit Center near 110th Ave NE. 5. Take the King County bus route 550, 556, or 241 to South Bellevue Bus Plaza.
To ride the 1 Line Angle Lake: 1. Cross the North Mezzanine 2. Take the elevator down to the Lynnwood platform. 3. Go to the opposite end of the Lynnwood platform toward Exit C. 4. Take the elevator up to the South Mezzanine. 5. Cross the South Mezzanine. 6. Take the elevator down to the Angle Lake platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator up to the South Mezzanine. 3. Take the elevator at Exit C (3rd Ave & Yesler Way) up to the street.
To ride the 1 Line from the street: 1. Go to Broadway Ave E and turn right toward E John St. 2. Enter the station at the corner of E John St and Broadway Ave E. 3. Take the street level elevator down to the North Mezzanine for elevator access to the platform. To ride the 1 Line from the South Mezzanine: 1. Take the pedestrian walkway toward the west exit. 2. Take elevator up to the street. 3. Turn left on Broadway Ave E. 4. Enter the station at the corner of E John St and Broadway Ave E. 5. Take the street level elevator down to the North Mezzanine for. To exit the station from the platform: 1. Go to the opposite end of the platform toward the E John St exit. 2. Take the platform elevator to the North Mezzanine. 3. Take the elevator at the North Mezzanine up to the street (E John St & Broadway Ave E) elevator access to the platform.
The announcement described below has ended. 1 Line: Trains are holding at SODO and Beacon Hill stations on the track to Lynnwood City due to intruder in the trackway. Please plan ahead for additional travel time or seek alternative options. Last updated: Dec 21, 2024 5:35 AM Click here for more information: https://www.soundtransit.org/1LineAlternatives
To ride the 1 Line: 1. Go to the opposite north end of the station. 2. Take the elevator up to the platform. To exit the station: 1. Go to the opposite north end of the platform. 2. Take the elevator down to the street.
Seahawks vs. Minnesota Vikings -S Line trains will depart Lakewood at 9:51 a.m. and 10:11 a.m. and depart King Street Sta 20 and 45 minutes after the game ends. -N Line train will depart Everett at 10:45 a.m. and depart King Street Sta 45 minutes after the game ends. Want to spread out a bit on your Sounder S Line ride to the game? Head for the northernmost train cars—they're usually a lot less crowded! For even more breathing room, try catching the second S line train in and out of Seattle; it’s generally a bit roomier than the first one. Enjoy the extra space!
Affected direction: to Lakewood/Tacoma
To ride the 1 Line: Please use the adjacent in-service elevators. To exit the station: Please use the adjacent in-service elevators.
To ride the 1 Line: 1. Take the elevator located directly across from the out of service unit down to the platform. To exit the station: 1. Take the nearby elevator located directly across from the out of service unit up to the street or pedestrian bridge to Montlake Blvd NE.
To ride the 2 Line: 1. Please use the adjacent in-service elevator. 2. Take the elevator down to the platform. To exit the station: 1. Please use the adjacent in-service elevator. 2. Take the elevator up to street level to exit the station.
To ride the 2 Line: Entering from the parking garage levels or pedestrian bridge: 1. Cross the small pedestrian bridge to the adjacent elevator. 2. Take the elevator to the platform. To exit the station: To the parking levels or pedestrian bridge: 1. Cross the tracks to the platform. 2. At the platform, take the elevator at Exit B to the pedestrian bridge or parking levels.
Affected stops: King Street Station Tukwila Station Kent Station Auburn Station Sumner Station Puyallup Station
Affected direction: to Seattle
T Line service is suspended from Old City Hall station to St Joseph station until further notice due to track blockage. Passengers are encouraged to seek alternative service options and plan ahead for additional travel time. Walking may be required to access the available alternative service options.
To ride the 1 Line from the street: 1. Go to Broadway Ave E and turn right toward E John St. 2. Enter the station at the corner of E John St and Broadway Ave E. 3. Take the street level elevator down to the North Mezzanine for elevator access to the platform. To ride the 1 Line from the South Mezzanine: 1. Take the pedestrian walkway toward the west exit. 2. Take elevator up to the street. 3. Turn left on Broadway Ave E. 4. Enter the station at the corner of E John St and Broadway Ave E. 5. Take the street level elevator down to the North Mezzanine for. To exit the station from the platform: 1. Go to the opposite end of the platform toward the E John St exit. 2. Take the platform elevator to the North Mezzanine. 3. Take the elevator at the North Mezzanine up to the street (E John St & Broadway Ave E) elevator access to the platform.
Please use elevator 1 or 2 located in the northeast corner of the garage until repairs have been completed. Please use caution when crossing the tracks.
Passengers can access the Track 1 platform through the station building along E 25th St. and seek assistance from a station agent, if needed. In the event of a track change, a station agent will temporarily unlock a chain that is blocking access to the west entrance to the Track 1 platform. The chain is a temporary solution to help prevent unauthorized vehicles from entering the platform until new retractable vertical posts can be installed for passenger safety and security. Sound Transit is working to produce an alternate temporary solution until the vertical posts are constructed. Affected lines: S Line
To Lynnwood, passengers requiring elevator service must go to another station. To ride the 1 Line: 1. Take the elevator down to the Angle Lake platform. 2. Take the 1 Line to Columbia City Station. 3. At Columbia City Station, transfer to the Lynnwood platform. Passengers requiring elevator service CANNOT exit from the Lynnwood platform. To exit the station: 1. Board the 1 Line. 2. Take the 1 Line to International District/Chinatown Station. 3. At International District/Chinatown Station, use the elevators to transfer to the Angle Lake platform. 4. Take the 1 Line to return Mount Baker Station. 5. Passengers can exit Mount Baker Station using the Angle Lake platform elevator. The elevator serving the Angle Lake platform is operating.
To ride the 1 Line to Lynnwood from Tukwila Int'l Blvd Station: 1. Take the elevator up to the Angle Lake platform. 2. Take the 1 Line to SeaTac/Airport Station. 3. At SeaTac/Airport Station, board the 1 Line toward Lynnwood. Passengers requiring elevator service CANNOT exit from the Lynnwood platform. To exit the station from Tukwila Int'l Blvd Station: 1. From the Lynnwood platform, board the 1 Line. 2. Take the 1 Line to Rainier Beach Station. 3. At Rainier Beach Station, board the 1 Line toward Angle Lake. 4. Exit the 1 Line at Tukwila Int'l Blvd Station. 5. Riders can exit Tukwila Int'l Blvd Station using the Angle Lake platform elevator.
To Angle Lake, passengers requiring elevator service must go to another station. To ride the 1 Line: 1. Take the elevator up to the Lynnwood platform. 2. Take the 1 Line to Beacon Hill Station. 3. At Beacon Hill Station, transfer to the Angle Lake platform. Passengers requiring elevator service CANNOT exit from the Angle Lake platform. To exit the station: 1. Board the 1 Line. 2. Take the 1 Line to Columbia City Station. 3. At Columbia City Station, transfer to the Lynnwood platform. 4. Take the 1 Line to return Mount Baker Station. 5. Passengers can exit Mount Baker Station using the Lynnwood platform elevator. The elevator serving the Lynnwood platform is operating.
To Lynnwood, passengers requiring elevator service must go to another station. To ride the 1 Line: 1. Take the elevator down to the Angle Lake platform. 2. Take the 1 Line to Columbia City Station. 3. At Columbia City Station, transfer to the Lynnwood platform. Passengers requiring elevator service CANNOT exit from the Lynnwood platform. To exit the station: 1. Board the 1 Line. 2. Take the 1 Line to International District/Chinatown Station. 3. At International District/Chinatown Station, use the elevators to transfer to the Angle Lake platform. 4. Take the 1 Line to return Mount Baker Station. 5. Passengers can exit Mount Baker Station using the Angle Lake platform elevator. The elevator serving the Angle Lake platform is operating.
To ride the 1 Line: Please use the adjacent in-service elevator. To exit the station: Please use the adjacent in-service elevator.
Seattle Fire Department had suspended service in the Rainier Valley due a nearby gas leak on S Hudson St. Puget Sound Energy arrived on scene and was able to resolve the gas leak allowing trains to resume normal service.
Seattle Fire Department has closed down a section of the track to ensure safety of the public. Trains are still running from Lynnwood to Columbia City, and from Othello to Angle Lake. Link Shuttle buses have been ordered to replace 1 Line service from Columbia City to Othello. Updates will be provided once Link Shuttle buses are available. Passengers are encouraged to seek alternative service options and plan ahead for additional travel time.
To ride the 1 Line: 1. Go to the opposite end of the Station (cross 236th St NW). 2. Take the elevator at Exit A up to the platform. To exit the station: 1. Go to the opposite end of the platform. 2. Take the elevator down to the street.
To ride the 1 Line: 1. Exit the station. 2. Turn right onto 12th Ave NE. 3. Turn right onto NE 65th St. 4. Enter the station and take the elevator down to the platform. To exit the station: 1. Go to the opposite end of the platform toward Exit B. 2. Take the elevator up to the street.
Affected stops: King Street Station Tukwila Station Kent Station Auburn Station Sumner Station Puyallup Station Tacoma Dome Station South Tacoma Station
Affected stops: King Street Station Tukwila Station Kent Station Auburn Station Sumner Station Puyallup Station Tacoma Dome Station South Tacoma Station
Affected stops: King Street Station Tukwila Station Kent Station Auburn Station Sumner Station